Dremel 876 Specifications download pdf (Page 37)

Quick Reference Guide

Product Health Status Mayco Firing Range Applied By: General Notes

Book Application

Series 2000 -

Gloss,

Specstone &

Stoneware-like

Glazes

Non-toxic

Non-moving

when fired.

Pg. 16

Shelf cone 06-6.

Check High Fire

Guide for color

changes at shelf

cone 6.

Shelf cone 06-6.

Check High Fire

Guide for color

changes at shelf

cone 6.

Brush/Sponge

Apply to properly

fired 04 bisque.

If firing to cone 6

or higher, apply

to the clay in the

greenware or low

fired bisque-04

stage.

Apply to properly

fired 04 bisque.

If firing to cone 6

or higher, apply to

the clay in the

greenware or low

fired bisque-04

stage.

• Apply 3 to 4 coats.

• Intermixable

• If doing majolica technique with mattes, best to apply an additional

coat. When handling you wipe off color.

• Very important that bisque be fired 2 cones hotter than glaze firing.

• Series 2000 Clear glazes and Speckled Clear glazes should be applied in

2 coats.

• If pitting occurs, can be refired one cone cooler than original firing for

smooth surface.

Elements

Non-toxic

Non-moving

when fired.

Pg. 14

Brush/Sponge

• Apply 3-4 flowing coats.

• Intermixable

• The shape of the object, application, firing temperature, kiln load

and firing time all affect the flow pattern.

• Natural earth tones.

• Surfaces vary from gloss to matte.

GLAZES: NON TOXIC

Classic

Crackles

Non-toxic

Non-moving

when fired.

Pg. 12

Shelf cone 06-6.

Check High Fire

Guide for color

changes at shelf

cone 6.

Apply to properly

fired 04 bisque.

These glazes are

more fluid at cone

6; apply two coats

only.

• Apply 3 even flowing coats.

• Can work under Classic Crackle using Stroke & Coats or One

Strokes. If applying more than 2 light coats this technique will

change the cracking pattern.

• Can work on top of the Classic Crackle with Stroke & Coats and

One Stroke, but test design first as color could fume.

• Cracks need to be stained after firing for cracks to show up. Can use

ink, translucent stains, shoe polish, etc.

Soft Fan Brush

Crystalites

Non-toxic

Non-moving

when fired.

Pg. 13

Shelf cone 06-6.

Check High Fire

Guide for color

changes at shelf

cone 6.

Apply to properly

fired 04 bisque. If

firing to cone 6 or

higher these glazes

become more fluid.

Do not add crystals

any closer than 1/2”

up from the outside

bottom edge of high

fire pieces.

• Apply 3 flowing coats. First coat- shake jar then apply coat of

color. Second coat: shake jar and apply coat. Third coat: stir the jar

and shake before applying.

• Crystalites do not flow, they just spread or bloom out.

1 2 ... 32 33 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Dremel 876 Specifications Page 37

Comments to this Manuals

Related products and manuals for Battery chargers Dremel 876